News:

Needing some php assistance with the script on the main AARoads site. Please contact Alex if you would like to help or provide advice!

Main Menu

Thickest mast arms

Started by STLmapboy, July 01, 2020, 11:14:47 PM

Previous topic - Next topic

STLmapboy

Teenage STL area roadgeek.
Missouri>>>>>Illinois


STLmapboy

#51
Although NY is mostly wire-hungs, the masts that hold them can be surprisingly wide.
Teenage STL area roadgeek.
Missouri>>>>>Illinois

STLmapboy

Teenage STL area roadgeek.
Missouri>>>>>Illinois

jakeroot

Something about these mast arms in Redmond, WA strikes me as a little meaty (image below):


STLmapboy

Here's a girthy one from Fredericksburg, VA.
Teenage STL area roadgeek.
Missouri>>>>>Illinois

KEK Inc.

Take the road less traveled.

Sani

I'm guessing this sort of artsy installation is beyond the scope of a mast arm. It has a curvy cousin a few miles down the road.

STLmapboy

Teenage STL area roadgeek.
Missouri>>>>>Illinois

STLmapboy

Quote from: Sani on November 09, 2020, 07:43:56 AM
I'm guessing this sort of artsy installation is beyond the scope of a mast arm. It has a curvy cousin a few miles down the road.
I've seen the Lenexa stuff before. It's pretty over the top.
Teenage STL area roadgeek.
Missouri>>>>>Illinois

jakeroot

Quote from: STLmapboy on November 09, 2020, 09:50:40 AM
Quote from: KEK Inc. on November 09, 2020, 02:10:41 AM

That looks better than 90% of USVI installs.

It's clean, but the signals are waaaayy too close together for such a wide road.

KEK Inc.

Quote from: STLmapboy on November 09, 2020, 09:50:40 AM
Quote from: KEK Inc. on November 09, 2020, 02:10:41 AM

That looks better than 90% of USVI installs.

I think the Carribean terriroties seem to borrow designs from Florida or Georgia.  Florida started to use similar designs like this.  I know on another USVI island, they have the trumpet design that is used more commonly in Georgia.  There's also a wild California design!

https://www.google.com/maps/@18.3380223,-64.9451859,3a,75y,344.06h,94.54t/data=!3m6!1e1!3m4!1suYxG6qMu3vdaNZO9gbl__w!2e0!7i13312!8i6656
Take the road less traveled.

jakeroot


KEK Inc.

Quote from: jakeroot on November 10, 2020, 11:59:38 PM
Quote from: KEK Inc. on November 10, 2020, 12:38:29 PM
There's also a wild California design!

https://www.google.com/maps/@18.3380223,-64.9451859,3a,75y,344.06h,94.54t/data=!3m6!1e1!3m4!1suYxG6qMu3vdaNZO9gbl__w!2e0!7i13312!8i6656

Given the signal placement, I'd actually call that more of a "Pierce County Design" (although the county phased this design out).

Also, wasn't that design only used on that corridor?
Take the road less traveled.

jakeroot

Quote from: KEK Inc. on November 20, 2020, 03:40:02 AM
Quote from: jakeroot on November 10, 2020, 11:59:38 PM
Quote from: KEK Inc. on November 10, 2020, 12:38:29 PM
There's also a wild California design!

https://www.google.com/maps/@18.3380223,-64.9451859,3a,75y,344.06h,94.54t/data=!3m6!1e1!3m4!1suYxG6qMu3vdaNZO9gbl__w!2e0!7i13312!8i6656

Given the signal placement, I'd actually call that more of a "Pierce County Design" (although the county phased this design out).

Also, wasn't that design only used on that corridor?

Heavily along that corridor, yes, but elsewhere too. Canyon Road, Waller Road, 112 St E (all of those have multiple examples along that road).



Opinions expressed here on belong solely to the poster and do not represent or reflect the opinions or beliefs of AARoads, its creators and/or associates.