AARoads Forum

Please login or register.

Login with username, password and session length
Advanced search  


New rules for political content in signatures and user profiles. See this thread for details.

Author Topic: Texas 6 between Cisco and Eastland  (Read 1666 times)


  • *
  • Offline Offline

  • Posts: 6114
  • Age: 46
  • Location: Oklahoma
  • Last Login: February 23, 2020, 03:24:18 AM
    • No Frills Blog
Texas 6 between Cisco and Eastland
« on: February 09, 2014, 05:52:29 AM »

Why does TX 6 follow old US 80 between Cisco and Eastland instead of following I-20?
This signature has been censored by the AARoads Bureau of Morality.


  • *
  • Offline Offline

  • Posts: 907
  • Age: 27
  • Location: Pineville, LA
  • Last Login: August 15, 2015, 05:21:19 PM
    • Backroading Louisiana
Re: Texas 6 between Cisco and Eastland
« Reply #1 on: February 09, 2014, 07:59:05 PM »

I'm not familiar with Texas, but I can give a general out-of-the-air answer (or at least try).

The state wanted to retain the US 80 segment in the state system, and decided to have TX 6 run along the old US 80 instead of running concurrent with I-20. It gives the road a number, and keeps TX 6 along what was probably its' original route.


  • Everybody Obeys the Octagon
  • *
  • *
  • Offline Offline

  • Posts: 13079
  • Elimitante the truck trarffic,

  • Age: 37
  • Location: New Jersey
  • Last Login: Today at 12:47:13 AM
    • Alps' Roads
Re: Texas 6 between Cisco and Eastland
« Reply #2 on: February 11, 2014, 09:49:38 PM »

They could have retained it in the system with a Farm Road number.


  • *
  • Offline Offline

  • Posts: 1130
  • Location: Over there
  • Last Login: Today at 02:47:33 PM
Re: Texas 6 between Cisco and Eastland
« Reply #3 on: February 12, 2014, 01:46:25 AM »

My assumption would be that they just left it where it was.  It appears to be the original route in that direction, after it was rerouted out of Breckenridge.

Most of the road between the towns is nearly equivalent to I-20, four lanes divided, with a speed limit of 75 (signed in summer, just after the Street View imagery was taken).  It has a few intersections, but not busy ones.  Still, it's 2.6 miles shorter to follow I-20, which also eliminates the need to go through Eastland.  I recently followed SH 6 when going that way because of my interest in the road (I've seen I-20 plenty of times), but if I was just driving between Gorman and Moran, I'd follow I-20.  I think it would make sense to reroute.  It's somewhat of a disservice to have a single route designation that doesn't follow the best way through the area.

Changing the designation on the existing route to a business route might be feasible.  It wouldn't be the only business route in Texas with a long stretch through a rural area, although that isn't common.  It could also get a loop number.  Another option, if you want to make use of what's already there, would be to make SH 112 go south to I-20 and extend FM 570 to Cisco.  I rather like the idea of extending SH 206 to Eastland and east to I-20 and rerouting 112 southward.

I think requests for such reroutings usually come from the district.  I suppose they don't get many complaints about it.  Anyone with a map can see the best way to go.  Still, it seems like a good idea to change it.
All of my posts represent my personal opinions and the official views of any governmental agency that has good sense.


  • *
  • Offline Offline

  • Posts: 1065
  • Location: Area Code 207
  • Last Login: February 10, 2020, 08:41:37 PM
Re: Texas 6 between Cisco and Eastland
« Reply #4 on: February 23, 2014, 05:55:02 PM »

It could be an I-20 Business Loop. There's 15 of them along old US 80 between the NM line and Baird. Including one about 31 miles between Odessa and Midland.
If only they had kept the series going for one more...
"Officer, I'm always careful to drive the speed limit no matter where I am and that's what I was doin'." Said "No, you weren't," she said, "Yes, I was." He said, "Madam, I just clocked you at 22 MPH," and she said "That's the speed limit," he said "No ma'am, that's the route numbah!"  - Gary Crocker


Opinions expressed here on belong solely to the poster and do not represent or reflect the opinions or beliefs of AARoads, its creators and/or associates.